 |
|
 |
|
Stand AC 2002 SP
The AC 2002 SP is the perfect match to lift your sound up for M 90 FCR or T 80 FCR speaker satellites. The (black or silver) steel construction with lacquered wooden base plates harmonise elegantly with all elements of the loudspeaker.
The boxes are firmly bolted, with the cable threaded through one of the two metal rods to the floor.
Height of the AC 2002 SP: 67,5 cm.
Diameter of the base plate: 26,0 x 22,0 cm
Suitable for the following Teufel speakers >
|
| Article / Price |
Type |
Quantity |
Availability (?) |
Add to cart |
|
|
|
Stand AC 4002 SP
The AC 4002 SP is designed to allow versatile mounting of Teufel speakers, either in a vertical, or a horizontal assembly. The real show-stopper is the 90-degree rotating feature of the speaker stand, which lends it an exceptionally aesthetic look.
Welded steel construction, with a matching high-gloss finished base and available in black or silver, this speaker stand allows you to best position your speaker for optimum playback.
All compatible Teufel speakers come with an M6 tamping screw located at the base for mounting. The cables can be fed through the inside of the stand and discreetly run to the floor.
Height: 67.5 cm base:
32.0 x 25.0 cm (width x depth upright)
25.0 x 32.0 cm (width x depth lengthwise)
Suitable for the following Teufel speakers >
|
| Article / Price |
Type |
Quantity |
Availability (?) |
Add to cart |
|
|
|
Stand AC 5001 SP
AC 5001 SP is the universal speaker stand for "short" columns or centre speakers you cannot place on a shelf or hang against the wall.
Its lofty height of 1085 mm automatically provides for acoustically feasible positioning of the speaker. A metal base plate with a diameter of 245 mm gives sturdy support to the 5 kg stand.
Available in black or silver.
Suitable for the following Teufel speakers >
|
| Article / Price |
Type |
Quantity |
Availability (?) |
Add to cart |
|
|
|
Stand AC 6002 SP
This, our second-largest moden for our universal speakers stands line, is suitable for a volume-rich, extensive loudspeaker - where stability with the appropriately sized socket is absolutely guaranteed.
The AC 6002 SP is designed for the mounting of upright-situated landscape Teufel loudspeakers - but again: just twist the stands 90 degrees and you've got a visually cohesive picture already.
The available black steel construction with its matching pre-painted base plate automatically lifts up the speakers to the correct playback height. A M6 screw in the speakres makes sure that all are stable when bolted tot he wall. The cables disappear in the two vertical metal rods.
The AC 6002 SP is ready to order.
Height: 67,5 cm
Base plate:
44,0 x 29,0 cm (WxD landscape)
29,0 x 44,0 cm (WxD length)
Suitable for the following Teufel speakers >
|
| Article / Price |
Type |
Quantity |
Availability (?) |
Add to cart |
|
|
|
Stand AC 8003 SP
The AC 8003 SP is the top model of our line of speaker stands.
Three massive metal tubes make it extremely robust - it will provide stable support even for our largest and heaviest speakers. This is in part due to the sturdy mounting, thanks to the M6 counter-sunk bolt used to affix the underside of the speaker to the base plate of the AC 8003 SP.
Its height of 67.5 cm automatically guarantees an optimal listening level. The speaker wire runs discreetly inside one of the three legs.
The AC 8003 SP can be ordered as single unit.
Height: 67,5 cm
Dimensions, base plate: 66,0 x 34,0 cm (width x depth)
Suitable for the following Teufel speakers >
|
| Article / Price |
Type |
Quantity |
Availability (?) |
Add to cart |
|
|
|
Stand M 10 P
MO 10 FCR speakers will shine like the gems that they are when properly seated on theses elegant, custom designed stands. Speaker cables disappear between two jet-black frames encasing a pane of grey glass. The oval base plate provides firm support for the stand.
Height: 82 cm
Dimensions, base plate: 31 x 19,5 cm (width x depth)
Suitable for the following Teufel speakers >
|
| Article / Price |
Type |
Quantity |
Availability (?) |
Add to cart |
|
|
|
Stand M 50 P
Speaker stands developed especially for Teufel micro satellites.
The speaker cable is hidden inside the base.
Height: continuously adjustable between 70 and 110 cm.
Design: metal, black.
Diameter of the base plate: 20 cm.
The price given is valid per item.
Only delivered in pairs.
Suitable for the following Teufel speakers >
|
| Article / Price |
Type |
Quantity |
Availability (?) |
Add to cart |
|
|
|
Stand M 60 P
This stand is designed specifically for our Impaq satellite speakers. Mounted on an M 60 P stand, the IP speakers are at an ideal height to produce a balanced sound. Thanks to the stand’s matched design with a silver ornament on the base plate, it integrates seamlessly with the Impaq speakers.
The price given is per stand; note that speaker stands can only be ordered in pairs.
Height of the M 60 P: 100 cm.
Base plate diameter: 24 cm.
Suitable for the following Teufel speakers >
|
| Article / Price |
Type |
Quantity |
Availability (?) |
Add to cart |
|
|
|
Stand M 550 P
The M 550 P guarantees the perfect position essential for optimum reproduction. If the correct speaker stand is used, the M 550 FCR can emit its frequencies at the exact height of the listener’s ear. The speaker is firmly screwed together and the cable is fed downwards in the base. Height: 70 cm. Width of the base plate: 30.5 cm.
Please note: not suitable for M 550 D – because dipoles must always be mounted straight onto the wall!
The price given is valid per item. Delivered as pairs.
Suitable for the following Teufel speakers >
|
| Article / Price |
Type |
Quantity |
Availability (?) |
Add to cart |
|
|
|
Stand M 550 P - Beech
The M 550 P guarantees the perfect position essential for optimum reproduction. If the correct speaker stand is used, the M 550 FCR can emit its frequencies at the exact height of the listener’s ear. The speaker is firmly screwed together and the cable is fed downwards in the base. Height: 70 cm. Width of the base plate: 30.5 cm.
Please note: not suitable for M 550 D – because dipoles must always be mounted straight onto the wall!
The price given is valid per item. Delivered as pairs.
Recommended list price: € 69,-
Suitable for the following Teufel speakers >
|
| Article / Price |
Type |
Quantity |
Availability (?) |
Add to cart |
|
|
|
Stand M 620 P
With its two narrow columns, this new speaker stand, which has been created especially for the M 620 FCR satellites, almost gives the observer the impression that it’s floating. A firm hold is guaranteed by the tried and tested Teufel construction principle (attachment at the box bases with tamping screw) and integrated cable channel for the speaker. The base plate guarantees a sturdy position. Height: 68 cm.
Please note: not suitable for M 620 D – because dipoles must always be mounted straight onto the wall!
The price given is valid per item. Delivered individually packaged.
Width of the base plate: 35 cm.
Suitable for the following Teufel speakers >
|
| Article / Price |
Type |
Quantity |
Availability (?) |
Add to cart |
|
|
|
Stand M 950 P
The M 950 P ensures secure positioning of the heavy M 950 FCR satellite speakers from system 9. A two-fold attempt has succeeded in achieving an impression of lightness, without limiting the weight-bearing capacity. A broad base in high-gloss black perfectly rounds off this addition to the M 950 FCR.
The price given is valid per item. Delivered individually packaged.
Width of the base plate 58 cm.
Suitable for the following Teufel speakers >
|
| Article / Price |
Type |
Quantity |
Availability (?) |
Add to cart |
|
|
|
Stand M 1000 P - Black
Secure attachment thanks to the tried and tested Teufel construction principle, with integrated cable channel and additional metal base plate for M 1000 FCR speaker. Fits Teufel model M 1000 FCR. Height: 50 cm.
The price given is valid per item. Delivered individually packaged.
Width of the base plate: 63 cm.
Height of the base plate: 4 cm.
Suitable for the following Teufel speakers >
|
| Article / Price |
Type |
Quantity |
Availability (?) |
Add to cart |
|
|
|
Stand M 1000 P - Beech
Secure attachment thanks to the tried and tested Teufel construction principle, with integrated cable channel and additional metal base plate for M 1000 FCR speaker. Fits Teufel model M 1000 FCR. Height: 50 cm.
The price given is valid per item. Delivered individually packaged.
Width of the base plate: 63 cm.
Height of the base plate: 4 cm.
Suitable for the following Teufel speakers >
|
| Article / Price |
Type |
Quantity |
Availability (?) |
Add to cart |
|
|
|
|
| Products: |
0 |
All prices include VAT.
Accessories shown in our pictures are not included with the products.
|
|
;showimage.focus();)
;showimage.focus();)
;showimage.focus();)
;showimage.focus();)
;showimage.focus();)
;showimage.focus();)
;showimage.focus();)
;showimage.focus();)
;showimage.focus();)
;showimage.focus();)
;showimage.focus();)
;showimage.focus();)
;showimage.focus();)
;showimage.focus();)
;showimage.focus();)
;showimage.focus();)
;showimage.focus();)
;showimage.focus();)
;showimage.focus();)
